Wednesday, February 14, 2018

OSHA Soil Classifications


A Summary of OSHA Soil Classifications

 

OSHA Soil Classifications

When performing an excavation on a jobsite it is important to determine the soil type. Failure to comply with their standards can result in a costly OSHA violation. OSHA has divided the types of soil that construction workers would be working with into three categories, Type A, Type B, and Type C. The first category, Type A is the most stable and safe ground to work in and the third category, Type C is the least stable.

Knowing your soil type will help you choose the correct trench box. Iron Lot is a good source to buy one from.


The first is High Stability (Type A Soil), also known as Class A Soil. This first category consists of clay, silty clay, sandy clay, and clay loam. OSHA states that no soil is Type A if it is fissured, is subject to vibration, has previously been disturbed, or has seeping water.


The second classification is Medium Stability (Type B Soil), also known as Class B Soil. This second group of soil consists of silt, sandy loam, medium clay, and unstable dry rock. Type B soil also includes previously disturbed soils, except those that would be classified as Type C soil. Further, Type B Soil includes soil that meets the requirement of Type A soil, but is fissured or subject to vibration.


The third and final category is Low Stability (Type C Soil), also known as Class C Soil. This third group of soil includes gravel, sand, loamy sand, soft clay, submerged soil, dense unstable rock, or soil from which water is freely seeping.

Understanding Soil Classifications Lead to Safer Job Sites


Understanding these three types of soil defined by OSHA is a key factor in making key decisions concerning the safety of the excavation. These factors play a role in determining the proper trench shield to use on the job. The depth rating of the trench shield should meet or exceed the depth of the trench and corresponding soil type. For example, if the soil type is Class C and the depth of the trench is 12', the Class C depth rating of the trench box should be at least 12'. 

Monday, February 12, 2018

Bedding Boxes

Bedding Box

 

Bedding Boxes Save Time and Materials

Using a bedding box to contain bedding material such as rock and stone will certainly save time and money. The alternative is to let the bedding material pile up and spill all over the job site. This creates waste and a poor quality of bedding material as dirt gets mixed into the excavator bucket load. Additionally, the bedding material can be moved along as the job progresses when it is stored in a bedding box.
The Kundel Bedding Box makes moving the box around the jobsite easier with the addition of a walk-bar and drag-bar. These two features come standard along with the tapered front end of the Titan model. The tapered front end also known as the fast-fill design allows the excavator operator to see into the bedding box as the bucket is being loaded. This results in less spills and a reduction in wasted material. Standard sizes include 4.5 yard, 6 yard, 7.5 yard, and 9 yard bedding boxes.

Wednesday, February 7, 2018

Trench Safety Begins Before You Dig

One can only hope this picture did not involve a worker going into this excavation without a trench box.  Even with the use of a trench box the spill pile is way too close the trench and has already started to fall back in. This is a trench collapse waiting to happen. It is also a good example of needing to properly plan before you dig.  Setting the pile further away would increase both safety and efficiency of production.  You have heard the old saying don't fall in the same hole twice, well don't dig in the same hole twice is also fitting.  It is an easy mistake to make, but it is one that can cost a life if you are not careful. If you are considering purchasing a trench box, Iron Lot has many to choose from.